（1)拌和寬度比較。

(1) Comparison of mixing width.

普通拌和機拌和寬度為2m；冷再生拌和機拌和寬度為2.4m。

The mixing width of a regular mixer is 2m; The mixing width of the cold recycling mixer is 2.4m.

(2)行進速度比較。

(2) Comparison of travel speed.

普通拌和機有效行進速度為6.7m/min；冷再生拌和機有效行進速度為8m/min。

The effective travel speed of a regular mixer is 6.7m/min; The effective travel speed of the cold recycling mixer is 8m/min.

(3)拌和深度比較。

(3) Comparison of mixing depth.

普通拌和機最大拌和深度為25cm；冷再生拌和機最大拌和深度可達56cm。

The maximum mixing depth of a regular mixer is 25cm; The maximum mixing depth of the cold recycling mixer can reach 56cm.

(4)拌和均勻性比較。

(4) Comparison of mixing uniformity.

普通拌和機拌和不均勻，存在漏拌土塊現象；冷再生拌和機的特制轉子使得拌和更均勻，水泥土碾壓后黏合更密實。

Ordinary mixer mixing is uneven and there is a phenomenon of missing soil blocks; The specially designed rotor of the cold recycling mixer makes the mixing more uniform, and the cement and soil bond more tightly after compaction.

施工質量比較

Comparison of Construction Quality

傳統人工及機械配套使用時水泥撒布均勻性、拌和機拌和均勻性均難以控制，影響施工質量。而粉料撒布車與冷再生拌和機配套使用時水泥撒布更均勻，撒布效果更好，拌和機拌和均勻且徹底，大大提升了施工質量，

The uniformity of cement spreading and mixing in traditional manual and mechanical equipment is difficult to control, which affects the construction quality. When the powder spreading vehicle is used in conjunction with the cold recycling mixer, the cement spreading is more uniform, the spreading effect is better, and the mixer mixes evenly and thoroughly, greatly improving the construction quality,